This is no ordinary wrought iron sliding gate. Our patent-pending sliding gate system was designed with ease of installation
and safety in mind. The Amazing Slider Guide posts stand a full
18 inches back from the slide gate which largely eliminates the
potentially dangerous issue of a moving gate rolling past stationary pinch
roller posts only inches from the gate. To ease installation, all
mounting hardware is fully adjustable so you don't have
to worry about getting it perfectly plumb, level and square on
the first try. This wrought iron sliding gate system was designed to be as easy to install as possible by professionals with experience in the field.
Our unique system allows for beautiful arched driveway gates to slide across your driveway with ease. See our slide gate styles. If you can not lay ground track across your driveway, consider our Cantilever Gate System as a solution.
Prices
for sliding gates vary by style and by size.
Unique Easy Installation and Safety Features of our Sliding Gate System
Heavy Duty Rollers: The Amazing Slider Guide
The heavy duty roller fits between the gate and the bolt on horizontal
Guide Rail eliminating the need for standard "pinch
rollers" and allows for the gate to have a curved top or other non rectangular design.
Guide Rail
The Guide Rail bolts to either end of the gate at the side and has
a stabilizer bracket (shown in image #2) at the center point of the
gate.
Frame Extension
The Slider Frame Extension is what allows the Slider Guide to hold
the gate upright in the closed position. Non-reach-through wire
mesh
is attached to the back frame at the factory and cannot be removed.
A second wire mesh designed to be attached to main gate is supplied
with every gate for attachment on site by the installer. Alternative
Style: the gate design can be continued into this area.
V-Track The galvanized "V" Track
can either be anchor-bolted to an existing driveway or set in concrete
while pouring a new grade beam. The gate rolls open and closed on
this track so it must be twice as long as the gap opening the gate
is securing.
Chain attach brackets
Most slide gate openers are chain driven. Our system uses a bolt-on
chain attach bracket which can be vertically adjusted to align
with the chain from the opener. This facilitates the installation.
Heavy Duty Chain
The heavy duty chain attaches to the adjustable chain attach
bracket at each end of the gate and passes through the drive sprocket
of
the
Polaris
2500SL Gate Opener (shown
in image #8).
Single or Bi-Parting Gates
A single slide gate may be used for
gap openings up to 18 ft wide. Gates longer than 18 feet must be
bi-parting (requires two
slider
guides
and openers,
as shown in the installation pictured above). For single leaf sliding
gates, a Catch Post is recommended to add stability.
Built-in Gate Opener Platform
The Amazing Slider Guide also features a mounting platform at the
bottom for attaching the gate opener. This eliminates the need
to pour a concrete pad for the opener, saving you time and money.
The Amazing Slider Guide roller placement and gate opener platform
placement are both adjustable vertically for use with various gate
heights and for a trouble free installation.
CALL US: 1-877-313-8901
We can answer any questions you have, and put together an itemized
quote for your Sliding Gate project.
Sliding
Gate System
Ground Track Sliding Gate System Requires: Modified
Swing Driveway Gate with Back Frame Slider
Guide "V" Track "V" Wheels Guide
Rollers Catch
Post
Ground Track Slide Gate Features: Works with right or left hand installations. Works
with all of our sliding gate openers. No
concrete pad needed for operator
(less work!) Long
lasting galvanized steel with baked
on Powder Coat finish.
Please
call us at 1-877-313-8901 for help with
your sliding gate project.
Modified
Swing Driveway Gate with Back Frame